Expert Answers about GMC Sierra 1500

• Connector For 6-Round on Truck Camper to 7-Way on 2014 GMC Sierra 1500
• We can help you out with the parts needed to go from your camper's 6-way to the 7-way of your 2014 GMC Sierra 1500. First, if you are looking for a 7-way for the truck bed of your Sierra for the plug-in connection, what you can use is the 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug # 50-97-410. Then, to connect to your camper's 6-round, there are a couple of options, depending on if your camper's 6-way center pin is the brake signal or the 12 volt. - Center Pin 12V...
  view full answer...


• Lift Spacers Needed For a 2019 GMC Sierra 1500 With 2" Lift and Firestone Ride Rite Air Springs
• The 1-1/4" Spacers # F2536 for the Firestone Ride-Rite Air Helper Springs # F2609 are for measurements of 6-1/2" to 7-1/2" between the upper and lower mounting brackets. You will need to measure the distance between with the mounting brackets installed on your 2019 GMC Sierra Denali 1500 to ensure you get the correct size spacer. The 2" Spacers # F2366 are for measurements of 7-1/2" to 8-1/2" between the upper and lower mounting brackets.
  view full answer...


• Towing Mirrors For A 2021 GMC Sierra 1500 That Won't Interfere With Factory 360 Degree Cameras
• We have the perfect towing mirrors for you! The K-Source Snap & Zap Custom Towing Mirrors # KS80930 are confirmed to fit your 2021 GMC Sierra 1500 and will not mess with the factory 360 degree cameras. The mirrors have an easy, tool-free installation and removal with no hardware required. The mirrors have a black plastic housing that provides a clean look and resists rust and corrosion. Using these mirrors will prevent vibration and wind noise. I attached a review video link below.
  view full answer...


• Correct Replacement Fan Motor for a PR-1 Range Hood
• PR-1 range hoods use a 110V fan motor, so the correct replacement fan motor for your Ventline PR-1 range hood is the Replacement Fan Motor for Ventline Range Hoods # BVD0278-00.
  view full answer...


• Should Blue Ox SwayPro Spring Bars Be Replaced for Significantly Lighter Travel Trailer
• You'll have a very rough ride if you use the bars you currently have, so I'd definitely recommend going with lower rated spring bars. It wouldn't be a bad idea to load up your travel trailer as it would normally be when you pull it and determine the actual tongue weight. I'll link you to an article that shows a couple of different ways of doing this, but the easiest way to do it would be to use a payload/tongue weight scale like the etrailer, part # e99044. I'll link to a video showing...
  view full answer...


• Roadmaster Universal Hy-Power Diode Wiring and Tow Bar Kit for 2018 GMC Sierra 1500
• The Roadmaster Universal Hy-Power Diode Wiring Kit, # RM-152 is used to for creating a connection that lets you use your vehicle's tail lights and wiring system for the needed indicator lights. This is purchased separately, if needed, using # RM-152. Wiring for the same purpose is included in the RoadMaster Nighthawk All Terrain and Sterling All Terrain Towing Combo Kit, # RM-9284-2; along with other items. The red wire cable that is part of the Roadmaster Nighthawk All Terrain, Non-Binding...
  view full answer...


• Parts Needed To Install a Trailer Brake Controller On The New Style 2022 GMC Sierra 1500
• Yes, you can install a aftermarket brake controller on your 2022 GMC Sierra 1500. You will need to have a dealer remove the factory controller programming from your trucks computer. The Tekonsha Plug-In Wiring Adapter # 3064-P will allow you to connect to the factory wiring on your Sierra to install a brake controller. I recommend the Redarc Tow-Pro Elite Brake Controller # RED63RR as it will allow you to have a dash mounted control knob instead of having a large controller like the P3...
  view full answer...


• Power Adapter for Furrion Back Up Cameras
• We have a couple of options for adapters that will allow your 2019 GMC Sierra 1500 to power your Furrion Back Up Camera item # FOS43TASF. The first is the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera item # FR87PR. This plugs into your Sierra's 7-way. A less bulky option that doesn't extend the length of your 7-way cord is the 12V PWM Filter for RV Backup Camera Systems - Hardwire item # VGR64VR. This is a permanent solution that you would hardwire in. I...
  view full answer...


• Tekonsha Brake Controller Wiring Adapters for 2016 GMC Sierra and 2017 GMC Acadia
• Brake controller wiring adapters that plug in under the dash can have different vehicle-side plugs depending on the generation and model of vehicle. For a 2016 GMC Sierra 1500 part # 3016 is correct. For a 2017 GMC Acadia that has a factory 7-way the wiring adapter to use is part # 3026-P.
  view full answer...


• Recommended Crossbar System for RetraxPro XR Tonneau on 2020 GMC Sierra 1500
• For your RetraxPro XR on your 2020 GMC Sierra 1500 I recommend using the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - Black - 71" Long # RRVA180B-RRRLT600, which is designed to fit specifically in the trax rails on the XR cover. These crossbars have built in channels on the top of the bars so that you can mount accessories to those T-slot channels or with mounts that clamp on to the bar, so you'll have a lot of flexibility if you already...
  view full answer...


• Parts Needed to Replace Dexter 3500-lbs Axle With Electric Brakes With a Timbren Axle-Less System
• If the ultimate goal with this is ground clearance then the Timbren Axle-Less Suspension systems in general are a great option because they automatically take the axle out of the equation. This means you're really just limited to how tall the trailer is off the ground with your tires. The Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs # A35RS545E would be a good choice that comes with hubs that have a 5 on 4-1/2" bolt pattern and electric...
  view full answer...


• Will Replacing Mirrors with K-Source Extendable Towing Mirrors Add Turn Signals on 2014 GMC Sierra
• If you currently do not have the turn signal function in the mirrors on your 2014 GMC Sierra it is unlkely that the K-Source Custom Extendable Towing Mirrors # KS62135-36G will add that feature. It is possible the wiring is there already but I wouldn't count on it.
  view full answer...


• Husky Towing 5th Wheel Hitch Install Kit for 2015 GMC Sierra 1500
• Since you have the hitch already and the Curt rails that mount to the bed, all you'll need the frame bracket/hardware kit, part # C16400. The kit includes the frame brackets, the hardware to mount the brackets to the truck frame, and the hardware to attach the bed rails to the frame brackets. This works out pretty well, you won't be forced to purchase the bed rails that you don't need. To install a 7-way trailer connector in the truck bed, you'll need part # 41157, which will plug inline...
  view full answer...


• How to Upgrade From 10K to 12K Equal-i-zer Weight Distribution System
• To upgrade your 10K Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37100ET to the 12K # EQ37120ET you need the following: - 12K Replacement Head # EQ90-02-1200 - 12K Replacement Spring Bars # EQ90-01-1299 Since these are a bit heftier you may need to adjust the setup of the system, but if you just walk through the installation instructions again you'll be able to ensure everything is setup correctly and make any necessary adjustments.
  view full answer...


• Replacement Mounting Hardware And Frame Brackets For A 2015 GMC Sierra 1500
• We do have a couple of options for you, however without knowing which base rails you have I can't make an accurate recommendation. However, if you have Reese base rails like # RP50064-58, you can use # RP50066 for replacement brackets and mounting hardware. If you have B&W Rails, like # BWRVK2504, you can use # BWRVR2503 for replacement brackets and hardware. If you don't have either of these rails, let me know and I'd be happy to help you further.
  view full answer...


• Parts Needed to Flat Tow a 2016 GMC Sierra 1500 with a 4 inch Lift Kit
• It is possible to flat tow a 2016 GMC Sierra 1500 with a 4 inch lift kit behind your RV. You will need a tow bar, base plate kit, safety cable set, tow bar wiring, and a supplemental braking system. I looked up a copy of the owner's manual for a 2016 GMC Sierra 1500 and it stated that only 4WD versions can be flat towed. For a 2WD version you will need to use a Tow Dolly, like part # RM-2050-1. If you have a 2WD just let me know and I can help you get all of the appropriate parts. You...
  view full answer...


• Recommended Towing Mirrors For A 2017 GMC Sierra 1500
• When it comes to installing trailer towing mirrors on your 2017 GMC Sierra 1500 I recommend The Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side # LVT-1800 which are confirmed for your vehicle. The towing mirrors slip over your vehicle's factory side-view mirrors to extend your line of sight. They have an aerodynamic shape that helps to prevent vibration and wind noise. They have a quick, slip-on installation with no tools needed. The mirrors have a durable ABS plastic...
  view full answer...


• How to Determine the Correct Lift Spacer Needed for Installing Ride-Rite Airbags on a Lifted Truck
• Since you have a 6" lift on your 2014 GMC Sierra 1500 you will need a lift spacer in order for the Firestone Ride-Rite Air Helper Springs part # F2430 to work. The correct way to measure for a lift spacer is when the truck is on the ground without any added weight in the bed. You will want to measure from the bottom of the top bracket to the top of the bottom bracket where the airbags attach. You can choose the right spacer using the measurements attached below. Space From Top To Bottom...
  view full answer...


• Safety Chain/7-Way Plug Holder Solution For A Square Tube Jack
• While we do not have an all-in-one device like the Stromberg Carlson Hitching Post Chain and 7-Way Plug Holder for Trailer Jacks # JET-30 for square tube jacks, I do have another possible solution. Instead, take a look at the: -Bauer Products 7-Way Trailer Plug Holder # BA79VR, with the Curt Trailer Safety Chain Holder Bracket # C68CR. This 7-way holder measures 5-1/4" long, 2-1/2" tall, and since it does not have any curve to it you can mount it to any flat surface like your square...
  view full answer...


• Brake Controller Wiring Harness for Tekonsha Prodigy P2 Installation on 2016 GMC Sierra 1500
• We do indeed sell the brake controller wiring adapter harness for the 2016 GMC Sierra as a separate item. The part number is # 3016. If you click the provided link, you can see an install video showing the # 3016 being used to install a brake controller on a 2014 Silverado. The procedure will be the same for your truck.
  view full answer...